7 Proven Ways to Boot Windows 10 Into Safe Mode

There are seven different ways to boot into Windows 10 Safe Mode. If you’ve been using Windows 10 for quite a while, you may have found that the F8 or SHIFT + F8 keys on your computer keyboard no longer function to access Safe Mode. These approaches no longer function since the Windows 10 startup operation is now quicker than ever before. However, this does not imply that Windows 10 does not have a Safe Mode. But you have to go through some additional steps to get there. Once you boot into Windows 10 Safe Mode, the software loads a minimal user interface that contains only the components and drivers required for the system to run. As it does not load items that can trigger Windows to crash, this helps make troubleshooting easier. Read this guide through to the end to learn about all the ways you can boot Windows 10 in Safe Mode. But first, we’ll go about what to do if you can’t log into Windows 10, then we’ll go over what to do if you can. Methods 1–4 can be followed if you are unable to log in to Windows 10. However, if you can access Windows 10, proceed to methods 5–7. Below are 7 proven ways to boot Windows 10 into Safe Mode: Method 1 – Shift + Restart This method works on the Windows 10 Sign In screen. Step 1 – If you are unable to log into your computer on Windows 10, but can access the Sign In screen, click and hold your keyboard SHIFT key. While holding down this key, click the Power button to select Restart from the menu that appears. Step 2 – Your Windows 10 system will restart and prompts you to choose an option. Select Troubleshoot. Step 3 – After that, choose Advanced Options from the Troubleshoot screen. Step 4 – Select Startup Settings from the Advanced Options menu. The Startup Settings option may not be visible at first based on your Windows 10 screen. If you don’t see this option, click the “See more recovery options” link. Step 5 – On the Advanced options screen, click the “Startup Settings” option. Step 6 – Then a screen will appear on Windows 10, asking you to restart your system to change advanced boot options, such as allowing Safe Mode. Press the Restart button. Step 7 – After your computer restart, you can select which boot options you want. You have three choices for entering Safe Mode: • Standard Safe Mode – To use it, click the 4 or F4 key on the system keyboard • Networking Safe Mode – press 5 or F5 • Enter Safe Mode with Command Prompt by pressing 6 or F6 Enter Windows 10 Safe Mode with an admin user account to make the changes you want. Method 2 – Interrupt Window 10 Boot Process If Windows 10 fails to boot normally three times in a row, it enters an Automatic Repair mode by default the fourth time. Step 1 – You can enter Safe Mode by using this mode. To activate the Automatic Repair mode, you must interrupt the usual boot loop three times consecutively. Use the Reset or Power button on your Windows 10 PC to stop it during boot, before Windows 10 finishes loading., you will need to hold the Power button down for at least 4 seconds to switch off the device. As the system enters “Automatic Repair mode”, the first screen you see states that the operating system is “Preparing Automatic Repair.” Step 2 – Then, to proceed, you may also be required to choose an account. Select an account with administrative privileges and enter its password. But if you’re not prompted for this detail, proceed to the next phase. Sit tight for Windows 10 to attempt an automated diagnosis of your device. Step 3 – Then, the Automatic repair screen will appear. On the screen, you need to press the “Advanced options” button. Step 4 – From the next screen that appears, choose “Troubleshoot” options. Right From here, the methods you have to follow are much the same as we have explained in Method 1 – Step 7 in this guide. Navigate to “Advanced Options -> Startup Settings -> Restart.” Then, on the system keyboard, tap the 4 or F4 key to enter minimal Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.” Method 3 – Bootable Windows 10 Setup Drive with Command Prompt If you have a bootable Windows 10 installation DVD or if you can make one you can also use it to load your damaged Windows 10 Computer into Safe Mode. Step 1 – Boot the Windows 10 Computer and wait for the setup environment to load. Select your preferred language and keyboard interface, then press Next. Step 2 – On the lower left side of the screen, click on the “Repair your computer” icon. Step 3 – Select “Troubleshoot” once asked which option you want. Step 4 – Select “Command Prompt” on the “Advanced options” screen. Step 5 – Enter the following command into the Command Prompt window: bcdedit /set {default} safeboot minimal. When you tap Enter on the system keyboard, it will inform you that “the process was successfully completed.” Step 6 – Close the Command Prompt and select “continue” when the next screen appears. When the computer restarts, Windows 10 enters Safe Mode. Log in with a user account that has administrative permissions and make the adjustments you want. Important note: The issue with this approach is that it instructs Windows 10 to boot into Safe Mode any time you boot it until you instruct it not to. To remove this setting and get Windows 10 to start normally again, repeat the process and enter the command: bcdedit /deletevalue {default} safeboot. Method 4 – System Recovery USB Drive A computer recovery USB drive can be created in Windows 10. If your PC is not functioning, make this USB recovery drive on another device running Windows 10. Once you’ve built a USB recovery drive, boot the Windows 10 Computer from it and, when prompted, load its contents. Step 1 – The first screen prompts you to select a keyboard style. Choose the that you’ll want to use, or if it isn’t available, click “See more keyboard layouts” to see the full list of available layouts. Step 2 – After you’ve decided on a keyboard style, click Troubleshoot on the “Choose an option” screen. Step 3 – The very next directions to boot into Safe Mode are much the same as shown in the first method in this article (Method 1 – Step 7), which would be to follow this path: “Advanced -> Startup Settings -> Restart.” Then, on the system keyboard, tap the 4 or F4 key to enter minimal Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.” Method 5 – System Configuration tool If you are able to log into your Windows 10 system, using the System Configuration tool is among the simplest ways to load your PC into Safe Mode. Many people are familiar with this tool according to its filename: msconfig.exe. Step 1 – Type the following words “system configuration” in the taskbar’s search section. Then, on the left, select the System Configuration shortcut. Step 2 – Select the “Boot” tab on your PC System Configuration window. Choose the “Safe boot” option in the Boot options section. Finally, press the OK button. Step 3 – Windows 10 asks you that you would need to restart your system for the new settings to take effect. If you still have some adjustments to make to do, choose “Exit without restart.” If not, you should choose “restart“, and your computer will enter Safe Mode after reboot. Method 6 – Shift + Restart on the Start Menu Another method for entering Safe Mode on your computer Windows 10 is to use the Start Menu options. Step 1 – To begin, press and hold the “SHIFT” key on your system keyboard. While holding down the key, press the Start -> Power -> Restart buttons. Step 2 – Your system will reboot and prompts you to choose an option. Select “Troubleshoot”. Step 3 – Following that, you must repeat the steps outlined in the first method of this guide (Method 1 – Step 7). In a summary, navigate to the “Advanced Options -> Startup Settings -> Restart.” Then, on the system keyboard, press 4 or F4 to enter Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.” Method 7 –Settings app If you have administrator access to your Windows 10 PC, you can also enter Safe Mode from the Settings app. Step 1 – Click the Start button on the left side of the home screen, and tap on the Settings button. Step 2 – Navigate to the Update & security section. Step 3 – Click the Recovery button on the left side of the Settings window. Select the “Restart now” button on the right side of the app, in the Advanced startup section. Step 4 – Then, your system will reboot, after that, choose the “Troubleshoot” option. Step 5 – Just as in Method 1 – Step 7 we discuss in this tutorial, you should take the same steps. In short, you should therefore navigate to “Advanced Options -> Startup Settings -> Restart.” Then, on the system keyboard, press 4 or F4 to enter Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.” Which Windows 10 Safe Mode Booting Method Do You Prefer? The Microsoft Windows 10 is a powerful fast operating system with a quick windows startup process. Getting into Windows 10 Safe Mode does not work as it did in previous versions of Windows, but the approaches available are similar to those in Windows 8.1. Try any of the strategies we discussed and let us know which ones worked well for you. Let’s talk about it in the comments section. References 1. Support.microsoft.com – Start your PC in safe mode in Windows 10 2. www.dell.com – How to Boot to Safe Mode in Windows 10 3. smallbusiness.chron.com – How to Run HP Computers in Safe Mode 4. support.hp.com – HP Customer Support – Knowledge Base 5. www.samsung.com – Win10: Safe Mode Boot Settings 6. support.avira.com – How do I start Windows 10 in Safe Mode? 7. Lenovo support – How to Boot my Lenovo Laptop in Safe Mode?  
Posted in Internet Marketing.

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter Captcha Here : *

Reload Image

nineteen − 7 =